Astra J Opel Insignia key programmer OBD device

Astra J Opel Insignia key programmer OBD device

KEY LEARNING DEVICE –  OPEL ASTRA J INSIGNIA

– The number of keys to program is selected by using switch 1 and switch 2.


1 keySwitch 1 – OFFSwitch 2 – OFF 
2 keysSwitch 1 – ONSwitch 2 – OFF 
3 keysSwitch 1 – OFFSwitch 2 – ON 
4 keysSwitch 1 – ONSwitch 2 – ON 


1. Turn ignition ON, select number of keys to program by using the switches, then plug device in the OBD2 connector. The led will light in green for 6 seconds, then it will start blinking in red and green. This will continue around 10-12 minutes until the key learning mode is enabled.

2. When this period elapsed the led will switch off and buzzer will beep.

3. You will need to turn ignition OFF and remove the key. Open and close driver's door (you have15 seconds to do that). Avoid turning on or operate any accessories (radio, headlights, etc).

4. Wait until the led light in green (the buzzer will beep), then turn ignition ON with new Transponder Key, which shall be learned. While programming the led will blink in red and green.

5. When the key is programmed, if you have another key to program the led will switch off and you need to repeat the procedure at point 3.

6. When all keys are programmed the led will start blinking in green and buzzer will beep two times. If an error was encountered the programming will be aborted, the buzzer will beep three times and the led will start to blink in red.


  • Views: 858
  • Product Code: Astra J Opel Insignia key programmer OBD device
  • Availability: 1
  • 2,760.00€
  • Ex Tax: 2,300.00€

Tags: KEY LEARNING DEVICES

TURBODECODER ® QUALITY LOCKSMITH TOOLS
TURBODECODER® hu66 VAG 1 GEN.
TURBODECODER® hu66 2/6 GEN.
TURBODECODER® hu92 BMW SERIES E
TURBODECODER® hu64 MB
TURBODECODER® SIP22 ITALIAN CARS
TURBODECODER HU100 OPEL GM CHEVROLET
TURBODECODER HU101 JLR FORD
Loading...