Turbo decoder HU101 Professional – Range Rover / Ford
TurboDecoder HU101 is Professional locksmith tool for unlocking and decoding automotive locks fitted to Ford, Range-Rover, Volvo, Land Rover and Jaguar. These locks have a HU101 key profile / SILCA /and contain 10 code wavers / discks. With our instrument, the unlocking itself becomes easy and fast. Because of the decoding option the operator is able to create / cut / a duplicate key without having to disassemble the lock. Turbo Decoder HU101 is suitable for unlocking both the door and the steering lock.
This decoder is an automatic self impression device which unlocks doors and ignition locks in a few seconds! It is Easy to learn and easy to use! And that’s why it is the perfect tool when your clients have lost their keys or the keys have been locked inside the car.
Our Turbo Decoder HU101 is designed to open fast the following vehicles:
Fiesta (from 2008 onward)
Focus (from 2004 onward)
Focus C Max (from 2003 onward)
Galaxy (from 2006)
KUGA (from 2008 onward)
Mondeo (from 2007 -2014)
S Max (from 2006 onward)
Transit (from 2002 To 2020)
Discovery (from 2006 onward)
Range Rover (from 2005 onward)
XK (X150) Emergency Key (from 2006 onward)
Most Models After 2007
S40 (From 2004)
V50 (From 2004)
S80 2007 from 2011
V70 2007 from 2011
XC70 2007 from 2011
V50 2003 from 2011
S40 2004 from 2011
Bt 50 from 2011
Our decoder is a high precision locksmith device with 10 double pins. So please use it carefully after watching the VIDEO INSTRUCTIONS! The application of the exact steps described in the video is very important in order to avoid damages to the lock or the tool and to get a successful opening!
Turbo decoder HU101 PROFESSIONAL kit contains:
– Turbo Decoder HU101
– 2 set up devices with calibrated point dimension for precise resetting of the sliding pins.
Please DO NOT USE THE RESETTING DEVICES FOR OTHER TURBO DECODER MODELS, because that can damage your tool!
If you have any questions about this product, feel free to contact us.
In case you need unlocking device for another car brand, check out our Turbo decoder catalog.
NOTE THAT ALL DEVICES ON THIS WEBSITE ARE FOR LEGAL USE ONLY!
See the car models that Turbo decoder HU101 is able to open by downloading the SILCA automotive key catalog or go to their site. Scroll down to the car you are interested in and, if it uses profile HU101, you are ready to unlock it.
TURBO DECODER HU101 USER MANUAL INSTRUCTIONS
Turbo decoder HU101 full info about use, opening procedure, code reading.
Turbo decoder parts
- key profile – this Turbo decoder has an HU101 / silca identification code / key profile. And so is able to unlock door and ignition locks on Ford, Range Rover, Land Rover, Volvo and Jaguar vehicles
- sliding pins – sliding mechanical components necessary to unlock and decode the locks mounted on JLR cars
- pin bar – on each side of the decoder we have mounted pin bars for inserting the instrument in and extracting it out of the locks
- tension wheel – round front segment of the turbo decoder handle to use for applying tension forces / left & right /
- pin activator wheel – it is connected with the pin bars to command them in open or closed positions
- turbo wheel – the back wheel of the tool handle which makes rotational/circular movements. It also puts the pins in action during the opening procedures.
Clean the lock with some light oil spray such as WD40 to ensure free lock wafers movement!
To discover the lock orientation you need to use your turbo decoder tool. First rotate the turbo wheel to the right, then push the pin activator wheel all to the front. Now you can insert the decoder into the lock. Take the decoder for the ring on the pin activator wheel and insert it carefully into the lock. It is not necessary to force the tool, it will enter if the lock is in good mechanical condition.
Now pull back the pin activator wheel only and apply rotational force on the tension wheel to the left. In this moment start to rotate the turbo wheel to the left too and feel the rotation. It will be easy with no resistance and in some point you will feel a resistance on it. Note where its line points to in the moment when the resistance begins. IF the line of the turbo wheel is before the first stop sector then your orientation is good and you can start the opening procedure. If the line is after the first stop sector, please turn the turbo wheel all to the right , push to the front the activator wheel and extract the decoder from the lock, then reverse it and insert again. Now your tool is orientated correctly.
To open the lock please pull back the pin activator wheel, force the tension tool to the right and rotate the turbo wheel to the left till its line match to the first stop sector. Turn back the turbo wheel to the initial position, i.e. all to the right. Loose the tension force on the tension wheel and check the lock. Now apply force to the left of the tension wheel, then repeat the rotation with the turbo wheel up to stop sector 1. Go back and loose the tension. Repeat these steps 20 times.
If the lock is not open please increase the rotating of the turbo wheel to the second stop point. All the rest is the same, only the stop point is changed from 1 to 2.
Do the same for another 20 times and if there is no result – eventually stop at sector 3 and repeat for 20 more times.
In some moment the lock must be opened. Usually we open the locks at the second stop sector but of course this depends on the operator abilities or the lock code configuration.
Decoding JLR locks after opening them with this Turbo decoder
If you need to decode the lock you just opened with your tool please follow the instructions:
Once your tool has turned the lock and it can be opened please do not remove the tool. Keep the lock turned left or right /but not in neutral/. When you are in this position please rotate the turbo wheel all to the left /its line will point stop sector 3 /. Leave it there and jiggle the tool by following the plane of the key profile. Then turn the turbo wheel all to the right, rotate the tool in the neutral lock position, push forward the pin activator wheel and extract the tool from the lock.
With the Turbo decoder out of the lock please pull back the pin activator wheel / pins become visible / and afterwards rotate the back wheel up to sector 3.
Now look at the pins, calculate the pin depths and by following side A and side B order write down the discovered code. This is the mechanical code you need to cut a working mechanical key by inserting it in CNC locksmith machine.
EXAMPLE OF CODE READING:
SIDE A READING CODE – 123414
SIDE B READING CODE – 2143
THE LOCK CODE IS: 1221344314
After the code reading you have to reset your sliding pins. This is necessary if you want to open another lock. Resetting procedure can be completed ONLY WITH SET UP DEVICE HU101.
Correct way of resetting:
Push the pin activator wheel to the front, rotate the turbo wheel all to the right and then inject the calibrated needle part of your set up device into the hole which is located under each pin on the edge of your key profile. There are 5 holes on each side. When you inject and push the resetting device the point of its needle will slide the pin and will stop automatically when the pin arrives to its start position. Now your tool is ready to open another HU101 lock.
Turbo decoder available: