Turbodecoder – original products – shop , info, guides, manuals

Learn, buy, use!

turbodecoder discounts

Here you will find information about Turbo decoders – vehicle locksmith tools, explanations, user manuals and before-sales information. Please read before ordering your Turbodecoder model.

Turbodecoder HU101 – Ford, Range Rover, Volvo 

Turbodecoders HU66 – VAG  – Generation 2/6

Turbo decoder HU66 – VAG – Generation 1 

Turbo-decoder HU92 – BMW E series 

Turbodecoder HU100R – BMW F series 

Turbodecoder HU100 – Opel / Chevrolet 

Turbo-decoder HU83 – Peugeot / Citroen 

Turbo-decoder SIP22 – Iveco, Fiat 

Turbodecoders HU64 Mercedes Benz 

Turbo_decoder TOY 48 Toyota, Lexus 

turbodecoder kia hyundai hy22

Turbodecoder HY22 Kia, Hyundai 

Turbodecoder Service Center 

 

Short information about Tubro decoder products:

Official Turbodecoder ® Catalog 

TURBODECODER ® professional locksmith automobile servicing!

Luckylocks catalog CATALOG 2018

SILCA CAR KEY CODES & PROFILES – USEFUL INFO FOR KEY PROFILE CODES USED FOR OUR AUTOMOTIVE LOCKSMITH TOOLS

SILCA CAR KEY GUIDE

turbodecoder profile to silca code references

turbodecoder-silca-code-identification

TURBO DECODER HU66 Generation 1 for opening and decoding all VAG door* and ignition** locks

  • AUDI 
  • VOLKSWAGEN
  • SEAT
  • SKODA
  • LAMBORGHINI
  • PORSCHE 

This Turbodecoder is created to open in an emergency first generation door and ignition locks of the VAG group automobiles from 2000 to 2004 with some exceptions: Skoda 2011, 2012 and later models.

This tool is equipped with tester key to facilitate the discovery of the orientation and generation of the lock.

Set-up devices – small calibrated tools for resetting the sliding pins before using the decoders. 

Transport box with foam inlay to protect your tool from accidental damage.

Booklet with scheme for registering the lock code discovered after the manipulation.

∗ door locks from 2000 up to 2004-2005 and some Skoda cars 2011-2012-2013 year

∗∗ ignition locks – covered from 2000 up to 2017!

see manual instruction pages buy turbo-decoder vag hu66 1g tool

turbodecoder hu66 user manual

TURBODECODER HU66 Generation 2/6 for opening and decoding all VAG door* locks

  • AUDI
  • VOLKSWAGEN 
  • SEAT
  • SKODA
  • LAMBORGHINI
  • PORSCHE 

For locks mounted on doors only! This tool is made to open and decode the second generation locks only.

Turbodecoder ® is equipped with tester key to facilitate the discovery of the orientation and generation of the lock.

Set-up devices – small calibrated tools, with “hu66, hu92” written on, for reseting the sliding pins before using the decoders. 

Black transport box with foam inlay to protect your tool from accidental damage: 

Booklet with chart to write down the codes discovered after opening necessary to create a mechanical key.

∗ door locks from 24-2005 up to 2017, before the new profile instalation by the VAG company

see manual instruction pages buy turbo-decoder vag hu66 2/6 tool

TURBODECODER HU64 for opening and decoding all MERCEDES BENZ door* and ignition** locks.

  • Mercedes Benz A class
  • Mercedes Benz C class – from 1999 onward
  • Cl -1995 up to 1999 year
  • CLK – from 2002 onward
  • Mercedes Benz E class – from 1997 onward
  • M class
  • G class
  • S class – from 1999 onward
  • Commercial vehicles – SPRINTER  2007 up to 2011

Turbodecoder HU64 is made to open all Mercedes locks – door, trunk and ignition. The code HU64 is taken from the SILCA code references.

For many years it was hard to open and service those 2 track HU64 locks with conventional locksmith tools and a lot of locksmiths refused to service them.With our Turbo decoder HU64 we have made a breakthrough in this situation and NOW the opening of Mercedes door or trunk locks is fast and easy. Decoding the pin depths is also a plus, so reproducing a working mechanical key becomes an easy task!

Tester key is NOT PROVIDED with this Turbo-decoder model!

2 set up calibrated point devices for precise resetting of the sliding pins

Transport box with soft foam inlay to carry the tool and protect it from damages: 

∗ door locks from 2000 up to this day 

∗∗ trunk locks -2003 up to this day

∗Ignition locks 2000-up to this day

see manual instruction pages buy turbo-decoder hu64

turbodecoder hu92 manual user guide

TURBODECODER HU92 – Locksmith tool for fast professional locksmith service – opens and decodes door, trunk , ignition locks mounted on BMW automobiles from 2000 up to 2013 year. The locks used on these vehicles are with HU92 key profile /Silca code reference /. Our automatic self-impressioning tool opens and decodes them in a few simple steps. After a few minute training the locksmith can perform the procedure successfully.

BMW SERIES: E46/E53/E60/E61/E63/E64/E65/E70/E71/E87/E90/E91/E92/E93 

MINI COOPER & some Land Rovers, which have the same lock profile, can also be opened with this decoder.

This Turbodecoder model is provided with a tester key  to facilitate the discovery of the lock orientation and generation.

Tools for precise resetting of the sliding pins.

Plastic transport box with red fastener and soft foam inlay to carry the tool and protect it from damages. 

see manual instruction pages buy turbo-decoder bmw e series hu92

TURBO-DECODER-HU100R-BMW

TURBODECODER HU100R BMW F Series for emergency opening and locksmith service. Lock profile is HU100R / Silca code /. No tester key provided with this version / ADVANCED / because the tool itself can discover the lock orientation. The opening procedure must be learned well before using the tool for real car opening. It is important to clean the lock with spray like WD40 to remove any dirt, dust or old grease!

Two set up tools with calibrated point dimension for precise resetting the sliding pins. Please DO NOT USE THE RESET DEVICES FOR OTHER TURBODECODER MODELS! This can damage your tool!

 Chart to write down the codes discovered after the manipulation necessary to cut a working mechanical key.

see manual instruction pages buy turbo-decoder bmw f series hu100r

turbodecoder kia hyundai hy22

Turbo decoder HY22 for locksmith emergency opening and servicing of KIA and HYUNDAI door and ignition locks with HY22 key profile / SILCA /.

No decoding option applicable for these 4-track locks because of the complicity of their wafers! This turbo tool is ideal for fast openings in case of lost keys or locked outs. To decode the lock we suggest  disassembling and reading the code directly from the lock wafers!

Certificate for International trademark registration.

To discover which cars use a HY22 key profile please look in INSTACODE or refer to SILCA key blanks catalog /available online/.

buy turbo-decoder kia / hyundai hy22 see manual instruction pages

user manual turbodecoder sip 22

A lot of Italian vehicles use locks with SIP22 key profile: Fiat, Iveco, Alfa-Romeo, Lancia, Maserati. With our TURBODECODER SIP22 ADVANCED their opening and locksmith service is really fast and easy! There are 2 lock models – with 7 and with 8 wafers/ discs / so please watch the instruction video to understand how to use this tool in each case!

ATTENTION! – do not use this turbokey directly on IGNITION LOCKS!  The sidebar inside makes it impossible to finish the opening procedure! If you have to service ignition steering wheel locks with SIP22 profile, please open the door lock first and, without resetting the pins of the tool, insert it into the ignition lock to unlock / turn / it, then extract the lock and service it. This is possible because, once you have opened the door lock, its code remains imprinted on the turbo-decoder pins.

The lock orientation is visible from the tool once it is inserted in 8-disc lock, on 7-discs lock the steps about the orientation are explained in our demo video.

Turbo decoder SIP22 kit contains:

Set-up tools with calibrated point dimension for precise resetting the sliding pins. Please DO NOT USE THE RESET DEVICES FOR OTHER TURBODECODER MODELS! This can damage your tool!

Transport box with red fastener and soft foam inlay to carry the tool and protect it from accidental damages.

Book with chart to write down the discovered codes necessary to cut a working mechanical key.

Car models covered:

ABARTH
500 – from 2008
Grande punto – from 2007 to 2010
Punto Evo – from 2010

ALFA ROMEO
156 – from 2001 to 2003
156 Sport W. – from 2001 to 2007
166 – from 2004 to 2008
Giulietta – from 2010
Mito – from 2008

CITROEN 
Jumper – from 2006
Nemo – from 2008
Relay – from 2006

FIAT 
500 – from 2007
Bravo – from 2007
Doblo – from 2006
Fiorino – from 2007
Grande Punto – from 2005
Idea – from 2009
Panda – from 2002
Punto Evo – from 2009
Qubo – from 2008

FORD EU  
KA – from 2009

IVECO
Eurocargo – from 2002 to 2007
Stralis – from 2002 to 2007

LANCIA
Delta – from 2008
Musa – from 2009
Ypsilon – from 2011

PEUGEOT
Bipper – from 2009
Boxer – from 2006

see manual instruction pages buy turbo-decoder italian cars sip22

turbodecoder hu83 professional

Turbodecoder HU83 is a locksmith tool for opening and decoding the French automobiles Peugeot and Citroen. Their seven disc locks are equipped with anti-stress clutch protection and any attempt to open them in a destructive way is likely to fail.

The opening with our tool is pretty easy and fast.

Please note that Citroen also use VA2 key profile in which the HU83 decoder can not enter. So, please, do not force it but carefully exam the lock before using the decoder! Here is a SILCA reference to  take a look at.

Tester key is not provided with this tool – it discovers the orientation when inserted in the lock.

Decoder HU83 kit contains:

Please DO NOT USE THE RESET DEVICES FOR OTHER TURBODECODER MODELS! This can damage your tool!

see manual instruction pages buy turbo-decoder peugeot / citroen hu83

turbodecoder | prodecoder locksmith solution hu100

TURBODECODER HU100  for OPEL, VAUXHALL, CHEVROLET and GM vehicles. 

Models covered:

  • Agila
  • Astra from 2004 onward
  • Combo van from 2004 onward
  • Corsa from 2002 onward
  • Insignia
  • Meriva from 2004 onward
  • Tigra from 2004 onward
  • Vectra up to 2006
  • Zafira from 2004
  • Astra from 2004
  • Combo from 2004 
  • Cruze from 2007 
  • Most models from 2006 onward
  • Allure from 2009
  • Lacrosse from 2009
  • Cadillac
  • Terrain from 2010
  • Chevrolet
  • Camero from 2009 onward
  • Equinox from 2010 onward
  • Cruze from 2007 onward
  • Saturn
  • Astra from 2008 onward

Helpful link to SILCA key profiles where you can check the profile of the car you have to service!

Turbodecoder HU100 kit contains: 

Two set up tools with calibrated point dimension for precise resetting of the sliding pins. Please DO NOT USE THE RESET DEVICES FOR OTHER TURBODECODER MODELS! That can damage your tool!

Book to write down the discovered codes necessary to cut a working mechanical key.

Certificate for International trademark registration: TURBODECODER registered on 28.04.2015,  Registration number: 013491352

see manual instruction pages buy turbo-decoder opel / chevrolet hu100

TURBO-DECODER TOY48  for TOYOTA & LEXUS vehicles. 4-track locks with anti-pick false cuts and anti-stress clutch system. Opening those locks in not so easy with any other locksmith instrument! Thanks to our double sided pins and fine tuning parts these locks are now easy to unlock and service.

Turbo-decoder TOY48 V2 ADVANCED kit contains: 

see manual instruction pages buy turbo-decoder toyota lexus toy48

turbodecoder hu101 ford range rover volvo

TURBO DECODER HU101 is designed to open fast FORD, RANGE ROVER, LAND ROVER, VOLVO, JAGUAR vehicles:

FORD: 
Fiesta (from 2008 onward)
Focus (from 2004 onward)
Focus C Max (from 2003 onward)
Galaxy (from 2006)
KUGA (from 2008 onward)
Mondeo (from 2007 onward)
S Max (from 2006 onward)
Transit (from 2002 To 2007)

LAND ROVER:
Discovery (from 2006 onward)
Range Rover (from 2005 onward)

JAGUAR: 
XK (X150) Emergency Key (from 2006 onward)
Most Models After 2007

VOLVO: 
S40 (From 2004)
V50 (From 2004)
S80 2007 To 2011
V70 2007 To 2011
XC70 2007 To 2011
V50 2003 To 2011
S40 2004 To 2011

MAZDA:

Bt 50 from 2011

In case of lost or locked inside keys! High precision 10 double pins locksmith device to use after carefully watching THIS VIDEO INSTRUCTIONS! The application of the steps described is very important to avoid damages to the lock or tool and to get a successful opening!

Turbo decoder HU101 ADVANCED kit contains: 

Two set up devices with calibrated point dimension for precise resetting of the sliding pins. Please DO NOT USE THE RESET DEVICES FOR OTHER TURBODECODER MODELS! That can damage your tool!

see manual instruction pages buy turbo-decoder ford / jlr / volvo hu101

TURBODECODER DAF – TRUCK series – we have started developing new models to cover the truck locksmith service too! Our first real truck decoder is able to unlock DAF’s in a few seconds. Additionally the operator can cut a perfect mechanical key from  the pin depths visible on the blade of our decoder.

Turbo-decoder DAF HU83 R  kit contains:

Two set up tools with calibrated point dimension for precise resetting of the sliding pins. Please DO NOT USE THE RESET DEVICES FOR OTHER TURBODECODER MODELS! That can damage your tool.

Chart to write down the discovered codes, necessary to cut a working mechanical key.

see manual instruction pages buy turbo-decoder daf / truck series hu83r

FOR EVERY ORIGINAL TURBODECODER WE PRODUCE AND SELL WE OFFER FULL SERVICE, TECHNICAL SUPPORT AND REPARATIONS!

Luckylocks service and customer care

For more details and prices please visit our Service center page.

If you have any additional questions –  please contact us by e-mail.

LUCKYLOCKS AD – Bulgaria