Description
This is the original special Turbodecoder Discount 3 tools pack campaign with tools produced by Luckylocks AD in Bulgaria! The automatic self-impressioning decoders in the Turbodecoder Discount 3 tools pack are designed specifically to open and decode door locks.
With the Turbodecoder discount 3 tools pack , you can save 60€!
LIst of the tools you can choose from
Here is the list of the tools you can choose from for your Turbodecoder Discount 3 tools pack:
- HU 100
- HU 101 10 PIN
- HU 101 9 PIN
- HU66 GEN 1
- HU 66 GEN 2/6
- HU 83-R DAF
- HU 100 R
- HU 64
- HU83
- HU92
- HY22
- KADJAR/CAPTURE
- MAN TRUCK
- SIP22
- TOY48
- VA2
- HU198
Precision Design and Features
All TurboDecoders are meticulously crafted to match a certain lock profile.Additionally, all of them incorporate three essential wheels:
- Tension Wheel – Ensures controlled movement.
- Gate Wheel – Supports the decoding mechanism.
- Turbo Wheel – Enhances speed and accuracy.
These components work together to provide precise and dependable lock decoding.
Important Usage Note
Always check the vehicle’s lock model and generation before selecting a tool. Using the correct decoder ensures optimal performance and prevents errors.




How does it work?
To use the TurboDecoder, insert the tool into the lock, ensuring proper alignment with the lock cylinder. The tool is designed to engage with the lock pins, allowing you to decode the lock without causing damage. Once inserted, apply consistent tension using the Tension Wheel to maintain a smooth operation. This will help keep the lock mechanism in place while the tool works to decode the pins.
- Tension wheel – with this wheel you apply tension on the tool during the opening procedure. The Tension wheel must be in constant tension while you operate with the Turbo wheel (read below)
- The Gate Wheel plays a crucial role in aligning and decoding the lock’s pin configuration. Slide back the wheel to allow full engagement of the tools’ pins with the wafers of the lock. If the Gate is not fully opened (pushed back) the pins of the tool cannot engage with the locks’ wafers.
- The Turbo Wheel assists in the self-impressioning process, completing the decoding once the pins are aligned by the Gate Wheel. Turn the Turbo Wheel in small increments to fully engage the lock’s mechanism and ensure precise results.
Efficiency improvement
Properly lubricating the lock mechanism greatly improves the TurboDecoder’s efficiency. Start by applying a small amount of WD40, a lock-specific lubricant, or graphite powder. This keeps the pins from sticking or jamming during the decoding process, ensuring smoother operation.
Next, check the lock’s orientation—it can be either left or right. Insert the tool and let it touch the bottom of the lock. Then, push it forward by pressing the turbo wheel. If the tool goes in deeper, click it back, extract it, reverse the orientation, and insert it again. When the orientation is correct, the turbo wheel won’t move forward. But if it turns easily, the tool is in the wrong orientation and won’t open the lock.
Also, don’t overuse the TurboDecoder on the same lock without inspecting it for wear. Repeated use can cause unnecessary damage. By following these steps, you’ll decode locks accurately and reliably, helping the TurboDecoder unlock Ford vehicles quickly and safely.
Opening procedure
Here are some steps for the opening procedure:
First , to insert the tool, please hold it by the Gate wheel. Your Turbo wheel must be rotated all to the right.
Fit the decoder all the way into the lock. Then pull back only the Gate wheel. When this is done you will see stop points 1 , 2 and 3.
Then apply LEFT tension on the Tension wheel and hold it. Rotate the Turbo wheel to the left untill its line comes to the first(1) stop sector. Stop your rotation and turn the Turbo wheel to the starting position (all the way to the right). Release the rotation tension. Rotate the Tension wheel to the RIGHT and then rotate the Turbo wheel again to stop point 1. Turn it back and release the tension. Repeat this 20 times with left and right tension direction . And keep stopping at the first (1) sector.
On condition that after your 20 pumps the lock is not opened yet, increase the Turbo wheel rotation untill its line points to stop point 2. After that repeat – left tension, rotate the Turbo wheel to stop point 2, go back to the right then release the tension. And then apply right tension and stop at sector 2. Repeat 20 more times.
On condition that you do this 20 times and the lock is still locked, go to stop point 3 for 10 more pumps and then the lock should be opened!
Decoding steps
If your goal is to open it– you are ready! But in case you want to decode the lock there are a few more steps to do.
- Turn the lock to the left or right – no matter which of both sides, keep it in rotation and make one pimp to stop point 3 / the last on the left /. Jiggle the tool by following the plane of your key blade. The discs transfer their precise code to the sliding Turbo decoder pins. Now extract the tool from the lock.
Extracting the tool after opening
Here are some steps to follow for proper tool extraction:
- Turn Right Completely the Turbo wheel: Ensure that the Turbo wheel of the tool is fully turned to the right.
- Neutral Position: Keep the tool in a neutral position inside the lock
- Push the Gate wheel (middle ring) forward: This might require some force, using either two or four fingers.
- Extract: Once the ring is pushed forward, you can extract the tool from the lock.
important remainders
Always turn the handle to the right and push it to the front when extracting or resetting the tool.
Also for reading the code, remember the handle position (maximum left at 3).