540 €
The original Turbo Decoder HU92 tool is designed specifically to open and decode door locks for all BMW E series till 2013.
This is the original and patented Turbo Decoder by Luckylocks AD.
This is the original Turbo Decoder HU92 BMW E patented tool invented and produced by Luckylocks AD in Bulgaria! The automatic self-impressioning decoder TurboDecoder HU92 is designed specifically to open and decode door locks for HU92 BMW E series and supports all BMW’s till 2013. This tool is perfectly suited for HU92 lock profile, allowing for efficient and non-destructive entry.
*The list of the tools is incomplete
Here is the incomplete list of the models the tool opens:
Turbo Decoder HU92 BMW E series Supports all BMW’s till 2013:
The TurboDecoder HU92 is meticulously crafted to match the HU92 lock profile. It includes a decoding blade with 8 pins—4 on one side and 4 on the other. Additionally, it incorporates three essential wheels:
These components work together to provide precise and dependable lock decoding.
Always check the vehicle’s lock model and generation before selecting a tool. Using the correct decoder ensures optimal performance and prevents errors.
To use the TurboDecoder HU92, insert the tool into the HU92 lock, ensuring proper alignment with the lock cylinder. The tool is designed to engage with the lock pins, allowing you to decode the lock without causing damage. Once inserted, apply consistent tension using the Tension Wheel to maintain a smooth operation. This will help keep the lock mechanism in place while the tool works to decode the pins.
Proper lubrication of the lock mechanism can improve the TurboDecoder HU92’s efficiency. Use a small amount of WD40 or any other lock lubricant or graphite powder to prevent the pins from sticking or jamming during the decoding process.
Lock orientation – it can be left or right. Just insert the tool. Once the Turbo Decoder touches the bottom of the lock, push it by pressing the Turbo wheel forward. If you see the tool going deeper – click it back and extract. Reverse it and insert again. If the orientation is correct when you press the turbo wheel forward, nothing will move. Wrong orientated Turbo Decoder won’t open the lock, its turbo wheel will turn easily.
It’s important to avoid excessive use of the TurboDecoder HU100 on the same lock without checking the lock for wear. By following these steps, you’ll achieve accurate and reliable decoding, ensuring the TurboDecoder HU92 works effectively to unlock vehicles quickly and without damage.
Here are some steps for the opening procedure:
First , to insert the tool, please hold it by the Gate wheel. Your Turbo wheel must be rotated all to the right.
Fit the decoder all the way into the lock. Then pull back only the Gate wheel. When this is done you will see stop points 1 , 2 and 3.
Then apply LEFT tension on the Tension wheel and hold it. Rotate the Turbo wheel to the left untill its line comes to the first(1) stop sector. Stop your rotation and turn the Turbo wheel to the starting position (all the way to the right). Release the rotation tension. Rotate the Tension wheel to the RIGHT and then rotate the Turbo wheel again to stop point 1. Turn it back and release the tension. Repeat this 20 times with left and right tension direction . And keep stopping at the first (1) sector.
On condition that after your 20 pumps the lock is not opened yet, increase the Turbo wheel rotation untill its line points to stop point 2. After that repeat – left tension, rotate the Turbo wheel to stop point 2, go back to the right then release the tension. And then apply right tension and stop at sector 2. Repeat 20 more times.
On condition that you do this 20 times and the lock is still locked, go to stop point 3 for 10 more pumps and then the lock should be opened!
If your goal is to open it– you are ready! But in case you want to decode the lock there are a few more steps to do.
Here are some steps to follow for proper tool extraction:
Here are some steps to follow for reading the code /after tool extraction/:
Once the tool is out of the lock, slide back the Gate wheel so that you can see the pins, rotate the Turbo wheel to stop point 3 and then you can start the code reading.
This lock has 8 discs/wafers/. Each disc can have cuts 1, 2, 3 or 4. The first pin is the one closest to the handle. Write its code. The second pin is on the other side of your tool. To read the code – compare the bottom line of each pin with the line on the blade accordingly. Write its code down, then continue till the last pin. To cut a mechanical key , insert these numbers in your CNC locksmith cutting machine.
To reset your pins for the next lock opening:
Remember – the pins slide easily so you do not need to force them.
Always turn the handle to the right and push it to the front when extracting or resetting the tool.
Also for reading the code, remember the handle position (maximum left at 3).
| Weight | 0,25 kg |
|---|
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Only logged in customers who have purchased this product may leave a review.
LuckyLocks AD © All Rights Reserved 2025
Anonymous (verified owner) –
Superfast delivery,clear instructions and the tool is top quality. Highly recommend!
Michael B Storie (verified owner) –
Excellent tools and fast service these tools are top notch.
Eduard R. (verified owner) –